Hardware Engineer - Board Bring-up & Integration (Part-time / Contract, Remote)
Job Description
Hardware Engineer – Board Bring-up & Integration (Part-time / Contract, Remote)
\n
GRT Corporation is building an industrial edge device that monitors electrical equipment in demanding environments. Our software and system design are strong in-house. We now want an experienced hardware engineer who knows, step by step, how to take a board from design files to a working, tested, manufacturable product, and who will guide us through the hardware decisions along the way.
\n
This is a hands-on, part-time advisory role. You will give clear written recommendations and stand behind them, review manufacturing releases, oversee board bring-up with our partner lab, and help hardware and firmware come together.
\n
\n
What you will do
\n
- \n
- Answer practical hardware questions (materials, finishes, coatings, protection, connectors, test access) with a short written recommendation you own.
- Review manufacturing releases before they go to the board house, for manufacturability and testability.
- Plan and oversee bring-up of new boards with our partner lab: power-up, clocks, boot, debug, peripherals, first measurements. Step in when a board is stuck.
- Work with our firmware team so firmware runs on real hardware early.
- Define acceptance tests and a production test, and lead root-cause analysis of failures.
- Advise on reliability, environmental and EMC testing, and the evidence needed for certification.
\n
\n
\n
\n
\n
\n
\n
What you bring
\n
- \n
- 10+ years of hands-on hardware engineering, including several mixed-signal microcontroller boards you personally took from first power-up to production.
- Strong STM32 experience (STM32H7 preferred): clocks, reset, boot, power configuration, debug-port recovery.
- Bring-up of data converters and measurement front ends on SPI, including bench noise and accuracy checks.
- Confident bench work (oscilloscope, logic analyzer, current-limited supplies) and clear written reports.
- Direct work with board and assembly houses; IPC-A-610 / IPC-6012 acceptance; conformal coating practice.
- EMC and environmental pre-testing; test fixtures and production test.
\n
\n
\n
\n
\n
\n
\n
Nice to have
\n
- \n
- Industrial or marine type approval experience.
- Motor control and current measurement.
- KiCad; European contract manufacturers.
\n
\n
\n
\n
How we work
\n
Part-time, about 10 to 20 hours a week, or fixed-scope packages with a defined deliverable. Remote, with working-hours overlap with US Eastern and Central European time. Occasional travel to a lab in Europe.
\n
To apply
\n
Send a short summary of boards you personally brought up (your role, the problems you found, how you fixed them) and one bring-up or failure-analysis report you wrote (redacted is fine). Compensation is agreed individually based on scope.
\n
GRT Corporation is an equal-opportunity employer.
